TY - JOUR
T1 - Comparison of Building Existing Partitions Through Building Information Modeling (bim)
AU - Mohandes, Saeed Reza
AU - Marsono, Abdul Kadir
AU - Omrany, Hossein
AU - Faghirinejadfard, Amir
AU - Mahdiyar, Amir
N1 - Publisher Copyright:
© 2015 Penerbit UTM Press. All rights reserved.
PY - 2015/7
Y1 - 2015/7
N2 - Partition walls are considered as one of the most crucial elements on interior space within the buildings. While a considerable amount of research has been carried out studying theses critical elements to be used on the interior space of the buildings, BIM has not been exploited so far in order to enhance the accuracy of work. Therefore, the main purpose of this study is to compare three types of commonly used partition walls in terms of materials, time and cost needed to install each of them using BIM. To achieve the specified goal, a case study was chosen. The framework used in this study consists of modeling the installation steps of each partition wall based on the chosen case study using Revit Architecture and Autodesk Inventor. In order to calculate the materials, time and cost required, Naviswork Manage was employed and it was found that drywall could be considered as the most useful one to be installed on the interior space of the buildings in comparison to the other two types of partitions.
AB - Partition walls are considered as one of the most crucial elements on interior space within the buildings. While a considerable amount of research has been carried out studying theses critical elements to be used on the interior space of the buildings, BIM has not been exploited so far in order to enhance the accuracy of work. Therefore, the main purpose of this study is to compare three types of commonly used partition walls in terms of materials, time and cost needed to install each of them using BIM. To achieve the specified goal, a case study was chosen. The framework used in this study consists of modeling the installation steps of each partition wall based on the chosen case study using Revit Architecture and Autodesk Inventor. In order to calculate the materials, time and cost required, Naviswork Manage was employed and it was found that drywall could be considered as the most useful one to be installed on the interior space of the buildings in comparison to the other two types of partitions.
KW - Partition Walls
KW - Bill of material
KW - Building information modeling
KW - Time and cost needed
UR - https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=georgia_southern_wosexp&SrcAuth=WosAPI&KeyUT=WOS:000218567400030&DestLinkType=FullRecord&DestApp=WOS_CPL
U2 - 10.11113/jt.v75.3668
DO - 10.11113/jt.v75.3668
M3 - Article
SN - 0127-9696
VL - 75
SP - 287
EP - 298
JO - Jurnal Teknologi
JF - Jurnal Teknologi
IS - 1
ER -