State Feedback Control of Boost Converter Using S1-ΣΔ PWM Method

Masoud Davari; B. Abdi; H. Nafisi; Gevorg B. Gharehpetian; H. R. Karshenas

doi:10.1109/PECON.2008.4762472

State Feedback Control of Boost Converter Using S1-ΣΔ PWM Method

Masoud Davari, B. Abdi, H. Nafisi, Gevorg B. Gharehpetian, H. R. Karshenas

Electrical & Computer Engineering

Research output: Contribution to conference › Presentation

Abstract

There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications for supplying mobiles, Digital Signal Processors (DSP) and etc. In this paper, it is shown that the control strategy, which is based on Digital Pulse Width Modulation (DPWM) with second-order 1-bit quantizer sigma-delta (ΣΔ) modulation and the state feedback, results in a better response than the control strategy, which is based on Pulse Width Modulation (PWM) and the state feedback. The comparison is based on the simulation of the boost converter by MATLAB software.

Original language	American English
DOIs	https://doi.org/10.1109/PECON.2008.4762472
State	Published - Dec 1 2008
Event	Internationals Power and Energy Conference (PECon) - Johor Bahru, Malaysia Duration: Dec 1 2008 → …

Conference

Conference	Internationals Power and Energy Conference (PECon)
Period	12/1/08 → …

Disciplines

Engineering
Electrical and Computer Engineering

Keywords

Boos Converter
Delta-sigma modulation
Digital modulation
Digital signal processing
Digital signal processors
MATLAB
PWM
Pulse width modulation
Pulse width modulation converters
S1-ΣΔ
Space vector pulse width modulation
State Feedback Control
State feedback
Voltage

Access to Document

10.1109/PECON.2008.4762472License: Unspecified

Cite this

@conference{d65801829f8e499594e2c64e0c632037,

title = "State Feedback Control of Boost Converter Using S1-ΣΔ PWM Method",

abstract = " There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications for supplying mobiles, Digital Signal Processors (DSP) and etc. In this paper, it is shown that the control strategy, which is based on Digital Pulse Width Modulation (DPWM) with second-order 1-bit quantizer sigma-delta (ΣΔ) modulation and the state feedback, results in a better response than the control strategy, which is based on Pulse Width Modulation (PWM) and the state feedback. The comparison is based on the simulation of the boost converter by MATLAB software.",

keywords = "Boos Converter, Delta-sigma modulation, Digital modulation, Digital signal processing, Digital signal processors, MATLAB, PWM, Pulse width modulation, Pulse width modulation converters, S1-ΣΔ, Space vector pulse width modulation, State Feedback Control, State feedback, Voltage",

author = "Masoud Davari and B. Abdi and H. Nafisi and Gharehpetian, {Gevorg B.} and Karshenas, {H. R.}",

note = "There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications; Internationals Power and Energy Conference (PECon) ; Conference date: 01-12-2008",

year = "2008",

month = dec,

day = "1",

doi = "10.1109/PECON.2008.4762472",

language = "American English",

}

TY - CONF

T1 - State Feedback Control of Boost Converter Using S1-ΣΔ PWM Method

AU - Davari, Masoud

AU - Abdi, B.

AU - Nafisi, H.

AU - Gharehpetian, Gevorg B.

AU - Karshenas, H. R.

N1 - There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications

PY - 2008/12/1

Y1 - 2008/12/1

N2 - There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications for supplying mobiles, Digital Signal Processors (DSP) and etc. In this paper, it is shown that the control strategy, which is based on Digital Pulse Width Modulation (DPWM) with second-order 1-bit quantizer sigma-delta (ΣΔ) modulation and the state feedback, results in a better response than the control strategy, which is based on Pulse Width Modulation (PWM) and the state feedback. The comparison is based on the simulation of the boost converter by MATLAB software.

AB - There are many applications which are very sensitive to the noise and should be supplied constant voltage. The Boost converter is one of these applications for supplying mobiles, Digital Signal Processors (DSP) and etc. In this paper, it is shown that the control strategy, which is based on Digital Pulse Width Modulation (DPWM) with second-order 1-bit quantizer sigma-delta (ΣΔ) modulation and the state feedback, results in a better response than the control strategy, which is based on Pulse Width Modulation (PWM) and the state feedback. The comparison is based on the simulation of the boost converter by MATLAB software.

KW - Boos Converter

KW - Delta-sigma modulation

KW - Digital modulation

KW - Digital signal processing

KW - Digital signal processors

KW - MATLAB

KW - PWM

KW - Pulse width modulation

KW - Pulse width modulation converters

KW - S1-ΣΔ

KW - Space vector pulse width modulation

KW - State Feedback Control

KW - State feedback

KW - Voltage

UR - https://doi.org/10.1109/PECON.2008.4762472

U2 - 10.1109/PECON.2008.4762472

DO - 10.1109/PECON.2008.4762472

M3 - Presentation

T2 - Internationals Power and Energy Conference (PECon)

Y2 - 1 December 2008

ER -

State Feedback Control of Boost Converter Using S1-ΣΔ PWM Method

Abstract

Conference

Disciplines

Keywords

Access to Document

Other files and links

Fingerprint

Cite this